The ADC PRIZMA analyzer is intended to diagnose technical state of aircraft engines by rapid analysis of the elementary composition of wear particles contained in oils, lubricants and working fluids after the appropriate sample preparation (filter deposition).
The ADC PRIZMA can be used to diagnose various engine types (diesel, internal combustion, gas turbine, etc.) requiring continuous monitoring of their technical condition.
| Feature | Value |
| Range of atomic numbers of the chemical elements to be determined | from Ca to Am |
| Number of chemical elements to be determined, including simultaneous detection | 74 |
| Measurement range of the mass fraction of elements in METALS AND ALLOYS | 0,5 to 100% |
| Measuring range of the mass fraction of elements DEPOSITED ON FILTERS | 0,1·10-4 to 250·10-4 % |
| Limits of permissible relative measurement error of elements mass fraction | 0,1 to 25%, depending on the concentration |
| Operating mode establishment time | not more than 5 min |
| Measurement time | 30 to 120 sec |
| Weight |
of the sensor: not more than 3 kg of the spectrometer: not more than 1 kg |
| Operating temperature range | -20 to +40°С |
| Overall dimensions (LxWxH) |
of the sensor: not more than 350×Ø 100 mm of the spectrometer: not more than 172×120×47 mm |
| Assigned lifetime | 5 years |